| Quantity: | |
|---|---|
The YuanLi 450MPa intensifier pump delivers pressurized water supply for Water Jet cutting machines. Built with a 37KW drive motor and a 24:1 supercharging ratio, this hydraulic-driven pump supports continuous operation for industrial applications. Designed as a replacement or upgrade unit for Water Jet systems, it operates at a maximum pressure of 450MPa with a working pressure rating of 320MPa, serving commercial procurement needs across metal processing, stone fabrication, and composite manufacturing facilities.
The pump provides a rated working pressure of 320MPA for sustained production use, with a maximum design pressure of 450MPA. The maximum flow rate reaches 3.7L per minute at operating pressure, supporting standard Water Jet cutting head configurations.
The intensifier operates at a 24:1 supercharging ratio, driven by a hydraulic system with a maximum oil pump pressure of 31.5Mpa. The hydraulic oil tank holds 100L, maintaining stable operating temperatures during extended production shifts.
The unit is equipped with a 37KW (49.62hp) drive motor, supporting 380V/220V/415VAC electrical inputs at 50/60HZ. The automatic control system regulates pressure output and cycle operations, reducing manual adjustment requirements.
The pump requires an inlet water pressure of 0.4MPA. Proper inlet filtration and water quality preparation support consistent intensifier performance and extend seal component service life.
The intensifier pump measures 1800×1300×1430mm (70.87×51.18×56.30in) and integrates with standard Water Jet cutting machine frames. The PLC-based control interface connects to existing machine control systems for synchronized operation.
The pump supports Water Jet cutting operations across machinery repair workshops, stone processing plants, metal fabrication facilities, and composite material production lines. It serves as either original equipment or a replacement unit for system upgrades.
Parameter | Value |
Rated power | 37KW (49.62hp) |
Voltage | 380V/220V/415VAC, 50/60HZ |
Working pressure | 320MPA |
Maximum pressure | 450MPA |
Maximum flow | 3.7L/min |
Inlet water pressure | 0.4MPA |
Super charging ratio | 24:1 |
Max pressure of oil pump | 31.5Mpa |
Capacity of hydraulic oil box | 100L |
Core components | PLC, Motor, Pump |
Key selling point | Automatic |
Machinery test report | Provided |
Video outgoing-inspection | Provided |
Warranty | 1 Year |
Warranty of core components | 1 Year |
Dimension (L×W×H) | 1800×1300×1430mm (70.87×51.18×56.30in) |
Place of origin | Guangdong, China |
Brand | YuanLi |
Applicable industries | Machinery repair, stone fabrication, metal processing |
The rated working pressure of 320MPA is recommended for continuous daily operation, while the 450MPA maximum pressure represents the upper design limit for intermittent peak demand scenarios.
The unit uses standard hydraulic and high-pressure plumbing connections, making it suitable as a replacement pump for compatible Water Jet cutting systems. Verification of connection dimensions is recommended before ordering.
The pump supports 380V, 220V, and 415VAC power supplies at both 50HZ and 60HZ, accommodating installation requirements across different regional grids.
Yes, each unit is supplied with a machinery test report and an outgoing inspection video to document pressure output and functional testing prior to shipment.
